WARNING :
- The CUDA version works only with old Nvidia cards and is not compatible from the Nvidia RTX3000 cards.
- When you install a new version, you don't need to uninstall the old one. You won't lose your settings.
- Each time you install a new version, you may need to delete the cache of your browser and restart it.
- Before updating JRT, check that your JRT update license doesn't expire before the date indication in orange above the version you are about to download.

NOTE : CUDA is only used for a specific setting of the photo mode and works only with old Nvidia cards. If you don't need it, it's better to install the version without CUDA that is lighter.

Click here to access to all the versions (with CUDA and/or before 2020/09/01)


If your JRT update license expires on 2024/12/01 or later

v1.53.0.6 Setup without CUDA - 25 December 2024
v1.53.0.6 Update without CUDA (If you already have installed v1.36.6.0 Setup without CUDA or newer)

- Fixed a bug that was causing some data on the dashboard no being updated. This issue could happen only on external devices.

v1.53.0.5 Setup without CUDA - 22 December 2024
v1.53.0.5 Update without CUDA (If you already have installed v1.36.6.0 Setup without CUDA or newer)

- Fixed a bug with the personalized colors on the dashboard when iRacing was stopped.
- Fixed a bug with the RPM leds on the dashboard for the Dallara P217 car.
- Fixed an issue that made the last lap consumption replaced by the average consumption.
- Fixed an issue that could cause the consumption not to be calculated.

v1.53.0.2 Setup without CUDA - 16 December 2024
v1.53.0.2 Update without CUDA (If you already have installed v1.36.6.0 Setup without CUDA or newer)

- Fixed a bug that made the best laptimes not displayed in a practice session.

v1.53.0.1 Setup without CUDA - 15 December 2024
v1.53.0.1 Update without CUDA (If you already have installed v1.36.6.0 Setup without CUDA or newer)

- Fixed an issue with the personalized colors on the dashboard.

v1.53.0.0 Setup without CUDA - 14 December 2024
v1.53.0.0 Update without CUDA (If you already have installed v1.36.6.0 Setup without CUDA or newer)

- Fixed an issue that could make JRT to crash.
- Now when using the 'Change also the RPM, Gear and Speed background color with the Shift Light' option on the dashboard, if you are using a header or borders, the header background and the border colors will also change.
- Fixed a bug with the Remaining Time calculations on replays.
- Added a background transparency coefficient for the timing pages.
- Added opacity, height and font size options for the pitbox yellow bar on the dashboard.
- Fixed a bug with the virtual winner and the predicted finishing position calculations.
- Added a second column for the driver/team name in case you want for example to seperate the driver and team columns.
- Fixed an issue with the broadcast mode 3 where the configured service (fuel and tires) were not shared properly to the other drivers.
- The JRT calculator now takes into account that the other cars consumption could be up to 10% less than your car, that can cause an extra lap for the race because the winner could then save a pit stop unexpected considering your own consumption.
- The session best laptime delta value on the dashboard is now relative to the best laptime shown in JRT even if this best laptime contains an incident.
- Fixed an issue with the orange circle on the trackmap that was not displayed in some cases.
- The font size of the in-car settings display now adapts to dashboards that have a ratio wider than 16:9.
- Added 'Target stint + 1 lap - consumption required', 'Target stint - 1 lap - consumption required', 'Target stint + 1 lap - consumption delta' and 'Target stint - 1 lap - consumption delta' options for the dashboard.
- Now in practice sessions, the push to pass counter displays 999 in practice sessions instead of 0.
- You can now change the AJAX request method from POST by default to GET for you JRT pages on your web server when using broadcast mode if you have issues with loading the data, by adding the request_method parameter in the url.
Just add ?request_method=GET at the end of the url, for example : https://yourwebsite/timing.html?request_method=GET
- Added the possibility to set a button to reset the maximum consumption value.
- Fixed a bug with the last laptime value.
- Reduced the font size in the TV Player to avoid issues when using others types of fonts.
- Added an option on the dashboard to change the name color to red/blue when the driver is not in the same lap in a race session.
- Fixed a bug on the dashboard where changing the opacity value and the background color had no effect for the compass.
- Added wind and north arrow color options on the dashboard and the possibility to display only the wind arrow.
- Added options for the predicted race length values on the timing and the dashboard to display or not the decimals.
- Added an option to deactivate the 'automatic autoscroll' for the 'Relatives mode' on the timing pages.
- Added values on the timing and the dashboard that show the predicted number of laps for the last stint of the race used by JRT for the calculations. It can be useful to know if JRT expects some cars to be short on fuel at the end of the race for example.
- Added an element on the dashboard to display a light when the pit limiter is ON.
- Added a dashboard light option to display a light when the pit limiter is ON with the text 'Pit Limiter ON'.
- Added the exceptions for the ReTime that has been increased to 120 seconds for the SF23 cars on Fuji and Motegi.
- Added the new cars and tracks.
- Fixed a bug with the 'use the car class color' option that was not working anymore.


If your JRT update license expires on 2020/09/01 or later

v1.33.12.38 Setup without CUDA - 14 December 2024
v1.33.12.38 Update without CUDA (If you already have installed v1.28.0.27 Setup without CUDA or newer)

- Added the new cars and tracks.